_Druckdaten_2022.png?height=120&name=2020x500_cm_ADX22_(Blende)_Druckdaten_2022.png)
General tools for repairs:
Instrument Rack to allow excessive oil to drip off: RT2050
Test Unit with a broad overview of all parameters: RT2500
Holding force measurement tool FG-burs: RT1020
Torque wrenches: RT2025 & RT2026
- Highly relevant to ensure all parts are tightened with the correct amount of Nm after reassembly.
Key to open & disassemble products
Turbines
Back Cap keys: Standard head - KE1650T(before 2020) & KE1651T (new model) small head - KE1023T
Key for HP & HC spray cover: KE1922
O-ring tool: RT1016
Contra angles:
Back Cap key: KE2011T
Bottom Screw Key: KE2011BT
Tool to remove inner adapter: RT2015
Tool to open upper part of straight HP: RT2011 (old models only)
Tool to open upper part of CA's: RT2012
Screw driver to remove screw on CA Heads: RT2016
Air Polisher:
Tool to remove coupling adapter: KE2021N &T KE3000KT/ST/WT (Please choose the right coupling type)
Additional tools: KE3010T (Powder pipe removal), KE3011T (Removal of nozzle of SP3011), KE3012T (Removal of hollow screw)
Bearing removal tools (optional - not recommended for regular repairs!):
Below you will find all relevant tools to remove or reassemble bearings on gears or cartridges.
Specifically for highspeed cartridges / turbines we do not recommend just replacing the bearings as the new bearings come with a different weight distribution that would require additional balancing. If that is not performed, the durability of the newly assembled cartridge will be severely limited.
Therefore the entire cartridge should be replaced!
Bearing Puller with tools: RT1011 with RT1011L & RT1011S
The RT1011 enables you to pull off the bearing from spindles for the cartridge.
Press: RT2010
Tools for the press to refix the : RT1031 & RT1032
Plate for Bearings removal: RT2017 & RT 2018
Block to refit the bearings: RT1012